Fusion 360 Advanced CAM Training Class (Sept 2017)

This two day class is focused on Fusion 360 Advanced CAM including:

  • Modeling Fixturing & Workholding systems
  • Multiple setups & coordinate systems
  • 3D toolpaths
  • Advanced toolpath containment
  • Rest Machining
  • 3+2 Machining

Class Prerequisites:  You must be familiar and comfortable with Fusion 360 (or HSMWorks) CAM.

Class runs from 9AM until 5PM with a break for lunch from 12-1PM

Refund Policy:
Cancellation 31 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 10 days or No Show:  No refund, but we will offer 50% discount on one future class of equal or lesser value

Students are responsible for travel and accommodations to Zanesville, OH.  Closest airport CMH (Columbus) is about an hour away.

Additional information at http://www.nyccnc.com/training

Hands-On CNC Training Class (Sept 2017)

This three day class will be focused on the operation and use of CAD, CAM and CNC milling machines!  Students will use Fusion 360 CAD & CAM and Tormach CNC mills.

Curriculum:

  • Introduction of class and attendees
  • Safety
  • Make our first Part (basic):
  • Now with a part “under your belt”, discuss:
    • Fusion360 CAD
    • Fusion360 Drawings
    • Fusion360 CAM
    • Prepping raw material
    • Recommended Tools to own
      • Must have
      • Useful but not mandatory
      • Luxury
    • Machining
      • PathPilot
      • Edge Finding
      • Setting up tools, tool holders, tool heights
      • Setting Tool Heights
      • How to use a hammer
    • Fixturing and Work holding
      • Clamps, vises, fixture, jigs, plates,e tc
    • Measuring tools, quality control
    • When Not to use CNC
    • Deburring & Post-op procedures
    • Future & Ongoing Resources
      • Recommended videos, websites, books, products
    • Discussion of Machine Shop Business Practices, Getting started, etc

Class runs from 9AM until 5PM with a break for lunch from 12-1PM

Refund Policy:
Cancellation 31 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 10 days or No Show:  No refund, but we will offer 50% discount on one future class of equal or lesser value

Students are responsible for travel and accommodations to Zanesville, OH.  Closest airport CMH (Columbus) is about an hour away.

Additional information at http://www.nyccnc.com/training

Introduction to Fusion 360 CAD & CAM Training Class

This two day introductory class is focused on the basics of using Fusion 360 in the machine shop, including CAD and CAM.   No prior experience is required.

Curriculum:

  • Modeling
    • Sketching
    • Constraints
    • Bodies & Components
    • Sketching Tips & Tricks
    • Demo’s: knife blade, speed vise handle
  • CAM
    • Setup’s & Work Coordinate Systems
    • Creating Tools in the Tool Library
    • Core operations: Face, 2D Adaptive, 2D Contour
    • Introduction to 3D tools
    • Demonstration with CAM Samples
  • Fixturing
    • Fixturing and workholding basics
    • How to model soft jaws

Class runs from 9AM until 5PM with a break for lunch from 12-1PM

Refund Policy:
Cancellation 31 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 10 days or No Show:  No refund, but we will offer 50% discount on one future class of equal or lesser value

Students are responsible for travel and accommodations to Zanesville, OH.  Closest airport CMH (Columbus) is about an hour away.

Additional information at http://www.nyccnc.com/training

Intro to TIG Welding Class

Intro to TIG Welding

Class hosted by Roy Crumrine (Crummy Welding) and Jonathan Lewis (Superior Welding)

Day One

  1. Welding and shop safety
  2. What is TIG welding?
  3. Machines and settings
  4. TIG torch set up
    1. Regular collet body
    2. Gas lens
    3. Cups sizes
    4. Gas flow
    5. Tungsten types, sizes and prep
  5. Feeding filler material
  6. Gas types and uses
    1. 100% argon
    2. Mixed gases
    3. Mixing your own gas
  7. Practice TIG welding using a sharpie/pen
  8. Amperage
  9. Contact to work distance (CTWD)
  10. TIG welding- welding drills
    1. Aluminum welding drill
    2. Steel welding drill
    3. Stainless welding drill

Day Two

  1. Review of Day One
  2. TIG Welding
    1. Alum, Steel, SS Lap welds
    2. Alum, Steel, SS Fillet Welds
  3. Small TIG welding projects
    1. Welding a “die”
  4. Cut and Etch samples
  5. Machine shop repairs
    1. Examples on fixing crashed tool mistakes
    2. Repairing mis-machining

Registration, Hotel & Class Information at www.nyccnc.com/training

REFUND POLICY:
Cancellation 31 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 10 days or No Show:  No refund, but we will offer 50% discount on one future class of equal or lesser value

Intro to TIG Welding Class

Intro to TIG Welding

Class hosted by Roy Crumrine (Crummy Welding) and Jonathan Lewis (Superior Welding)

Day One

  1. Welding and shop safety
  2. What is TIG welding?
  3. Machines and settings
  4. TIG torch set up
    1. Regular collet body
    2. Gas lens
    3. Cups sizes
    4. Gas flow
    5. Tungsten types, sizes and prep
  5. Feeding filler material
  6. Gas types and uses
    1. 100% argon
    2. Mixed gases
    3. Mixing your own gas
  7. Practice TIG welding using a sharpie/pen
  8. Amperage
  9. Contact to work distance (CTWD)
  10. TIG welding- welding drills
    1. Aluminum welding drill
    2. Steel welding drill
    3. Stainless welding drill

Day Two

  1. Review of Day One
  2. TIG Welding
    1. Alum, Steel, SS Lap welds
    2. Alum, Steel, SS Fillet Welds
  3. Small TIG welding projects
    1. Welding a “die”
  4. Cut and Etch samples
  5. Machine shop repairs
    1. Examples on fixing crashed tool mistakes
    2. Repairing mis-machining

Registration, Hotel & Class Information at www.nyccnc.com/training

REFUND POLICY:
Cancellation 31 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 10 days or No Show:  No refund, but we will offer 50% discount on one future class of equal or lesser value

Intro to TIG Welding Class

All equipment, consumables and materials will be provided.  No prior experience required.

This is the BETA class; we are limiting to 4 students.  Jonathan and Roy are top-notch TIG welders in industry and have training experience.  This class is the beta / soft-launch of a new welding program we are launching.

Please do not sign up for this class unless you are certain you can attend.

Fusion 360 Advanced CAM Training Class

This two day class is focused on Fusion 360 Advanced CAM including:

  • Modeling Fixturing & Workholding systems
  • Multiple setups & coordinate systems
  • 3D toolpaths
  • Advanced toolpath containment
  • Rest Machining
  • 3+2 Machining

Class Prerequisites:  You must be familiar and comfortable with Fusion 360 (or HSMWorks) CAM.

Class runs from 9AM until 5PM with a break for lunch from 12-1PM

Refund Policy:
Cancellation 31 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 10 days or No Show:  No refund, but we will offer 50% discount on one future class of equal or lesser value

Students are responsible for travel and accommodations to Zanesville, OH.  Closest airport CMH (Columbus) is about an hour away.

Additional information at http://www.nyccnc.com/training

Fusion 360 Advanced CAM Training Class

This two day class is focused on Fusion 360 Advanced CAM including:

  • Modeling Fixturing & Workholding systems
  • Multiple setups & coordinate systems
  • 3D toolpaths
  • Advanced toolpath containment
  • Rest Machining
  • 3+2 Machining

Class Prerequisites:  You must be familiar and comfortable with Fusion 360 (or HSMWorks) CAM.

Class runs from 9AM until 5PM with a break for lunch from 12-1PM

Refund Policy:
Cancellation 30 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 3 days or No Show:  No refund, but we will offer 50% discount on one future class

Students are responsible for travel and accommodations to Zanesville, OH.  Closest airport CMH (Columbus) is about an hour away.

Additional information at http://www.nyccnc.com/training

Hands-On CNC Training Class

This three day class will be focused on the operation and use of CAD, CAM and CNC milling machines!  Students will use Fusion 360 CAD & CAM and Tormach CNC mills.

Curriculum:

  • Introduction of class and attendees
  • Safety
  • Make our first Part (basic):
  • Now with a part “under your belt”, discuss:
    • Fusion360 CAD
    • Fusion360 Drawings
    • Fusion360 CAM
    • Prepping raw material
    • Recommended Tools to own
      • Must have
      • Useful but not mandatory
      • Luxury
    • Machining
      • PathPilot
      • Edge Finding
      • Setting up tools, tool holders, tool heights
      • Setting Tool Heights
      • How to use a hammer
    • Fixturing and Work holding
      • Clamps, vises, fixture, jigs, plates,e tc
    • Measuring tools, quality control
    • When Not to use CNC
    • Deburring & Post-op procedures
    • Future & Ongoing Resources
      • Recommended videos, websites, books, products
    • Discussion of Machine Shop Business Practices, Getting started, etc

Class runs from 9AM until 5PM with a break for lunch from 12-1PM

Refund Policy:
Cancellation 31 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 10 days or No Show:  No refund, but we will offer 50% discount on one future class of equal or lesser value

Students are responsible for travel and accommodations to Zanesville, OH.  Closest airport CMH (Columbus) is about an hour away.

Additional information at http://www.nyccnc.com/training

Introduction to Fusion 360 CAD & CAM Training Class

This two day introductory class is focused on the basics of using Fusion 360 in the machine shop, including CAD and CAM.   No prior experience is required.

Curriculum:

  • Modeling
    • Sketching
    • Constraints
    • Bodies & Components
    • Sketching Tips & Tricks
    • Demo’s: knife blade, speed vise handle
  • CAM
    • Setup’s & Work Coordinate Systems
    • Creating Tools in the Tool Library
    • Core operations: Face, 2D Adaptive, 2D Contour
    • Introduction to 3D tools
    • Demonstration with CAM Samples
  • Fixturing
    • Fixturing and workholding basics
    • How to model soft jaws

Class runs from 9AM until 5PM with a break for lunch from 12-1PM

Refund Policy:
Cancellation 31 Days or More in advance of class:  100% Refund
Cancellation within 30 days: 50% Refund
Cancellation within 10 days or No Show:  No refund, but we will offer 50% discount on one future class of equal or lesser valueuture class

Students are responsible for travel and accommodations to Zanesville, OH.  Closest airport CMH (Columbus) is about an hour away.

Additional information at http://www.nyccnc.com/training